Use our Henry Gage Pins to hold your paper. They have a little plastic lip to hold your paper in place. Lay your paper in the position desired. Slide two of the Henry Gage Pins up to the longest side of your paper and one on the shortest side. When they are tight against the paper sides, adhere to the machine base. The Gage pins are re-usable.
Another option is to take one spare piece of the paper you are printing on. Cut out the paper to form an “L”. Adhere this L shape on the machine base with Removable double-sided tape so the inside of the “L” is the outside boundary for two sides of your paper to be printed. Tape a small piece of plastic over the corner of the inside angle of the “L”. Slide your paper up against the L shape so one corner should go just under the small plastic holder to hold it in place while the sides of the paper are tight against the inside of the L shape.
Posted in: L Letterpress, L Letterpress Supplies Category